Announcement

Collapse
No announcement yet.

New PC Build - 1-2TB Scratch Drive or external RAID0?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bob Loblaw
    replied
    I have 4 HDDs in internal RAID 0, and my read speeds are around 600MBs. I keep my projects and cache on a separate PCI drive. I back it all up to an external at the end of every work day. I donít trust RAID 0, so I never keep anything on it that isnít already backed up elsewhere, mainly raw footage only.

    Leave a comment:


  • New PC Build - 1-2TB Scratch Drive or external RAID0?

    I'm currently assembling a new pc build based around a 3700X and a 5700XT. Storagewise, there is a SATA SSD left I can use as a system drive but I am wondering what would work best with Resolve for temporary project storage.

    SSD prices have come down a lot, so having a spacious scratch drive is possible. I'm usually doing commercials, so no feature lenght space requirements. With a scratch drive, I could store at least 2-3 projects at the same time.
    QUESTION: Is SATA really such a disadvantage to PCI->M2 if it sustains 500MB/s read speed? 3:1 is around 185/MB/s, even Redcode 8K 5:1 is only 270MB/s, so pretty much any non-QLC-SATA SSD should do, right?

    With denoising and OFX, I'm thinking one can't do without a buffer drive for render cache, right? Question again, DCI4K - DNxHR444 is only 185MB/s, so what would I do with 1800-2500MB write/read of PCI?

    Is an external scratch-RAID-0 still the better option? Having 2-4 HDDs should sustain a good 300-450MB sequential read and space is totally a non-issue with this solution?

    I'm pretty lost here because there's a load of possibilities with cheaper SSDs now. Any input?
Working...
X