Announcement

Collapse
No announcement yet.

BLE4K | R/S BMPCC4K with Tilta Nuclues-Nano

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Marshall Harrington
    replied
    I think you'll find that adding a 1/4X20 mounting point and resourcing a bracket to use will take that issue out of play. Just my 2 cents.

    Leave a comment:


  • Zolac
    replied
    Originally posted by iammuc View Post
    great, just ordered. What made you decide on size? Circuit board limitations? Cable looks hard wired also yes? Trying to picture how and where to mount it. How are you mounting it on your P4K?
    Lots of the design is based off the board and yes it is hard wired.

    This is where I can still gather feedback to influence final design.

    I didn't want this product to be held up in design, so as much as I hate the idea of "just let the user figure out there own solution, like velcro tape or something like that" It's what will allow me to get this out quick and without making it cost more.

    but formally I'm going to try to add a 1/4" threaded insert or a make the a 3D printed threading mount somewhere on the case. Unfortunately as simple as it sounds, from the place I'm planning to have these printed the costs rise a lot especially for
    the small batch size I'm doing.
    Last edited by Zolac; 05-31-2019, 12:03 PM.

    Leave a comment:


  • iammuc
    replied
    great, just ordered. What made you decide on size? Circuit board limitations? Cable looks hard wired also yes? Trying to picture how and where to mount it. How are you mounting it on your P4K?

    Leave a comment:


  • Zolac
    replied
    Originally posted by iammuc View Post
    Brilliant. I just ordered a Tilta Nucleus handle. will you be able to support stop start on that also?
    The BLE4K connects to the Nucleus-Nano Motor, so you can as long as the Handle can connect to the motor it can toggle start/stop.

    Leave a comment:


  • iammuc
    replied
    Brilliant. I just ordered a Tilta Nucleus handle. will you be able to support stop start on that also?

    Leave a comment:


  • tmronin
    replied
    and pre-ordered - exactly what I was looking for!

    Thanks Csaba!

    Leave a comment:


  • Zolac
    started a topic BLE4K | R/S BMPCC4K with Tilta Nuclues-Nano

    BLE4K | R/S BMPCC4K with Tilta Nuclues-Nano

    Hello everyone,

    Just launched Pre-Orders for my product, BLE4K.

    It enables Run/Stop support between any Bluetooth enabled Blackmagic camera and the Tilta Nucleus-Nano.

    Estimated shipping by end of June, early July. $50 USD.

    preorderbanner.jpg

    Order here: https://ble4k.com/


    Cheers
    Last edited by Zolac; 05-30-2019, 04:56 PM.
Working...
X