Announcement

Collapse
No announcement yet.

PWM(S-BUS)+LANC+DC12V BMMCC Angle Breakout Expansion Box Module by RADIOPROEKTOR

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gino, what other controllers use TRRS connection? So far, the OLG Lite is the only one, aside from the CGPro I have seen that use a breakout box. Most others I have seen, plug directly into the DB15 connector on the Micro Camera. I looked into replacing the TRS in Sijan’s box with a TRRS, but the later is too long to fit in this small space. So the adapter cable became the best solution.
    Cheers

    Comment


    • The dumbest thing that One Little Remote Lite even don't check common modern smartphone TRRS specification and don't attempt to follow it. He just put [ground] pin similar as used in outdated pinout used in "unknown camcoders, portable VCD and DVD players".
      So this makes it 100% not compatible with any common existing TRRS to TRS adapters (adaptors).

      https://en.wikipedia.org/wiki/Phone_...TRRS_standards
      http://blog.mklec.com/trrs-and-trs-p...ets-explained/

      This all just proofs that TRRS is a total mess without any clear specification.

      BTW. Rode makes nice Rode-SC3-3-5mm-TRRS-Adaptor if someone wish to check if it compatible with CGpro controller.




      Different length 3.5 mm TRRS connectors

      Last edited by shijan; 02-28-2018, 01:24 PM.
      All my custom made accessories for BMMCC/BMMSC now available here https://lavky.com/radioproektor/

      Comment


      • There are also $2 3.5mm 3 Pole Male to 4 Pole 3.5mm Female Jack Adapters on ebay and other places.
        https://www.ebay.com/itm/3-5mm-3-Pol.../132382917181?
        https://www.ebay.com/itm/3-5mm-4-pol.../183038609260?
        https://www.ebay.com/itm/NEW-4-Pole-.../202100602984?
        https://www.ebay.com/itm/3-5mm-3-Pol.../292313793049?
        https://www.ebay.com/itm/3-5mm-3Pole.../232545717532?

        You can cut them and make nice custom pinout adapter for your CGpro controller and Expansion Box if you want to keep original cable untouched.

        All my custom made accessories for BMMCC/BMMSC now available here https://lavky.com/radioproektor/

        Comment


        • Originally posted by Antithese View Post
          My one arrived today! It took only 11 days to Japan.
          Product quality is amazing!

          This is my handheld setup.
          Micro Cinema Camera + URSA Mini Handgrip looks like “URSA Micro”

          [ATTACH=CONFIG]23985[/ATTACH]

          [ATTACH=CONFIG]23986[/ATTACH]

          [ATTACH=CONFIG]23987[/ATTACH]

          [ATTACH=CONFIG]23988[/ATTACH]

          [ATTACH=CONFIG]23989[/ATTACH]

          Thank you Shijan
          Great looking rig.

          Would you mind listing everything you have in this build? I'd love to build up something similar.

          Comment


          • Originally posted by trispembo View Post
            Great looking rig.

            Would you mind listing everything you have in this build? I'd love to build up something similar.
            trispembo, just in case if you missed my PM, please check it. Earlier i send you email respond but got return error message, it seems your email inbox is full.

            P.S. Just wonder. There where so many preorder requests just few months ago when Expansion Boxes where out of stock. But now when Expansion Boxes v2 are finally available only small amount of those people are actually confirmed their interest.
            All my custom made accessories for BMMCC/BMMSC now available here https://lavky.com/radioproektor/

            Comment


            • I did get the message, thanks.

              I haven't purchased a Micro Cinema Camera yet. I'm just pricing how much it will cost with all the bits before making a decision.

              Comment


              • Finally i have time to make normal close-up photo. New awesome CNC machined enclosure:

                All my custom made accessories for BMMCC/BMMSC now available here https://lavky.com/radioproektor/

                Comment


                • Looking very nice!!

                  Comment


                  • Yes it is, I allready have one, and it is a nice improvement over the original 3D print unit. Also the new box works with the Wooden Camera Micro Cage, as well as the SmallRig Micro Cage.
                    Cheers
                    Last edited by Denny Smith; 04-10-2018, 09:20 AM.

                    Comment


                    • BMMCC Angle Breakout Expansion Box version 3 released.
                      Changes:
                      - Thicker and better quality cables.
                      - LUMBERG 1614 09 DC power socket connector.
                      All my custom made accessories for BMMCC/BMMSC now available here https://lavky.com/radioproektor/

                      Comment


                      • Just wanted to say thanks so much for the quality work. Your breakout box is exactly what i dreamed of. Because of it, I can eliminate the clunky LP-E6 to-dtap adapter and thus yeild a more compact setup. now i hear you make custom cables?
                        Last edited by kiliksun; 07-18-2018, 07:47 PM.

                        Comment


                        • Yep, i have some short cables for sale now:

                          29cm DC power cable with 5.5x2.1mm barrel plug connectors
                          29cm DC power cable with 5.5x2.5mm barrel plug connectors

                          13cm DC power cable with 5.5x2.1mm barrel plug connectors (coming soon...)

                          All my custom made accessories for BMMCC/BMMSC now available here https://lavky.com/radioproektor/

                          Comment


                          • After some delays now i'll be able to ship new Expansion Boxes from next week. You can order them now in marketplace https://lavky.com/radioproektor/ Price for combined kits is slightly lowered now, but if you on high budget production and wish to support future development feel free to add $5-10 as donation by adding Optional Enhanced Packaging item to the order.

                            BMMCC Angle Breakout Expansion Box version 4 released.
                            Changes:
                            - Better quality ADAM TECH HDT15-PT D-SUB connector with gold plated pins.
                            - LANC ground wire now use BLACK color instead of GREY.

                            Work in progress...
                            All my custom made accessories for BMMCC/BMMSC now available here https://lavky.com/radioproektor/

                            Comment


                            • Some custom work was done for request last days. Expansion Box with dual LANC sockets:



                              All my custom made accessories for BMMCC/BMMSC now available here https://lavky.com/radioproektor/

                              Comment


                              • And another custom made Expansion Box. This time i was asked to place Composite Video connector instead of DC socket connector. It will help to use BMMCC camera with broken HDMI.





                                Also in addition to worldwide shipping by Air Mail now i can offer shipping by UPS Express to USA, Canada, Australia, EU, UK, Switzerland and Japan only.

                                It will cost $32-$44 depending of package weight. Delivery time 3-5 days.

                                Customs duty fees, sales tax and 10% UPS brokerage fees may apply depending of your country duty-free limits.

                                Approximate duty-free limits:
                                - USA $800
                                - Canada $15 or $47
                                - Australia $769
                                - EU $27
                                - UK $21
                                - Switzerland $5
                                - Japan $93

                                Last edited by shijan; 08-15-2019, 01:03 AM.
                                All my custom made accessories for BMMCC/BMMSC now available here https://lavky.com/radioproektor/

                                Comment

                                Working...
                                X