Announcement

Collapse
No announcement yet.

PWM(S-BUS)+LANC+DC12V BMMCC Angle Breakout Expansion Box Module by RADIOPROEKTOR

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • looks good, and the little rubber ducky is definatly a must have accessory. i want one, take it pver 4k amy time.
    On skin tones- "Give me mud and I will make the skin of Venus out of it, if you allow me to surround it as I please", Eugéne Delacroix

    Comment


    • Antithese, this is the first rig I have seen using the URSA Mini Handgrip. Could you tell a little more how it's working for you? What functions does it control and etc.

      Thanks!

      Originally posted by Antithese View Post
      This is my handheld setup.
      Micro Cinema Camera + URSA Mini Handgrip

      Comment


      • Thank you Gyuse!
        This duck is my most favorites accessory

        Hello vvvvv.
        I'm not sure It will help. But I made video for you

        Comment


        • Originally posted by Antithese View Post
          Thank you Gyuse!
          This duck is my most favorites accessory

          Hello vvvvv.
          I'm not sure It will help. But I made video for you

          damn A+ response. I really like the BM handles look and position there coupled with the smallrig rosette. Good to know all the functions work on the micro.

          I think I may eventually end up with something similar plus something like the one little remote and plug the lanc into the back of it's pass through. But it is a bit costly for now especially when I could put that money toward a 4k camera. So many of the cheaper options camera wise actually get quite expensive when you start adding on the necessaries that are left out to reduce the price.

          -edit- Also did the leather hand strap come with the handle? I see the handle for sale on B&H for 199 but it doesn't show the leather strap.
          Last edited by Ryanite; 05-28-2017, 09:01 PM.

          Comment


          • Originally posted by Ryanite View Post
            damn A+ response. I really like the BM handles look and position there coupled with the smallrig rosette. Good to know all the functions work on the micro.

            I think I may eventually end up with something similar plus something like the one little remote and plug the lanc into the back of it's pass through. But it is a bit costly for now especially when I could put that money toward a 4k camera. So many of the cheaper options camera wise actually get quite expensive when you start adding on the necessaries that are left out to reduce the price.

            -edit- Also did the leather hand strap come with the handle? I see the handle for sale on B&H for 199 but it doesn't show the leather strap.
            Hello Ryanite.
            Thank you for A+ rate

            I was thinking about witch handle or controller I should buy over couple weeks. Then finally I just bought URSA Mini Handgrip couple days ago.

            I like simple look, style, and light weight. That is reason I love Micro Cinema Camera over other camera. So I think this handgrip is best option for me until Blackmagic release better handgrip for Micro Cinema Camera. (I don't know they will make it. Just my hope.)

            URSA Mini Handgrip package also include handstrap and two LANC cable (18cm and 35cm). Handstrap help a lot for holding.

            Thank you!
            Last edited by Antithese; 05-28-2017, 10:00 PM.

            Comment


            • Thanks for feedback and collaboration everyone! As so as research and development stage of this box is finished and most preorders are filled i decide to start a new fresh and clear thread in "For Sale / Want to Buy" forum area [url]http://www.bmcuser.com/showthread.php?20371



              Here are also few useful links all together if someone lost his way info in this long thread:

              Recommended angle HDMI cables: http://bmcuser.com/showthread.php?19...l=1#post228451

              Recommended low profile angle 3.5mm trs jack cables: http://bmcuser.com/showthread.php?19...l=1#post237374

              BMMCC/BMMSC S.Bus, PWM, LANC controllers database: http://www.bmcuser.com/showthread.php?20363

              Angle HDMI Clamp with Ugreen adapter: http://www.bmcuser.com/showthread.php?19313r
              Last edited by shijan; 10-18-2017, 03:33 AM.
              All my custom made accessories for BMMCC/BMMSC now available here https://lavky.com/radioproektor/

              Comment


              • I posted my question in the evening and when woke up in the morning this! More then A+ .

                The grip looks great and the autofocus got me by surprise. Didn't expect that to work. Hope it doesn't cost too much premium here in Finland (it will), because it seems like a must have for the micro.

                Thanks for the info and great video Antithese.

                Originally posted by Antithese View Post

                Hello vvvvv.
                I'm not sure It will help. But I made video for you

                Comment


                • I have planes to release version 2 of Angle Expansion Box Module with CNC machined aluminum enclosure! 3D printed enclosures work very well but too slow in manufacture and needs too many dumb hand work to make them look nice. Hope that next batch will be available in autumn.


                  Last edited by shijan; 10-17-2017, 06:39 AM.
                  All my custom made accessories for BMMCC/BMMSC now available here https://lavky.com/radioproektor/

                  Comment


                  • do you think its worth revisiting the design on the mkII?

                    I personally felt losing one of the TRS sockets (given you can configure them how you want anyway) and thus allowing a thinner box overall would be worth it

                    Comment


                    • CNC machined box will be 1mm thinner inside, but same time there are few new limitations. First i can not fit components to new design due large internal radiuses. But later got idea to compensate that radiuses with 0.5mm and 1mm stainless washers and manually grind edges on them.
                      BTW very hard to find washers of that thickness and diameter. https://www.aliexpress.com/item/Thic...825515230.html

                      Last edited by shijan; 10-17-2017, 10:12 AM.
                      All my custom made accessories for BMMCC/BMMSC now available here https://lavky.com/radioproektor/

                      Comment


                      • Originally posted by Stelvis View Post
                        do you think its worth revisiting the design on the mkII?

                        I personally felt losing one of the TRS sockets (given you can configure them how you want anyway) and thus allowing a thinner box overall would be worth it
                        But you can't configure 4 pwm buttons without 2 TRS sockets

                        Comment


                        • Originally posted by Stelvis View Post
                          do you think its worth revisiting the design on the mkII?

                          I personally felt losing one of the TRS sockets (given you can configure them how you want anyway) and thus allowing a thinner box overall would be worth it
                          This box was designed as a part of the kit but not as standalone thing, so the box extend to exact same height as Ugreen HDMI adapter.
                          And even if you remove one TRS socket it can not be thinner because you need a space for cable management and Dupont Jumper pins. So the external dimensions and overall look will be exact same as in Expansion Box v.1. Changes and modifications will be only under the hood. Probably new enclosure will be slightly heaver (wish it was some kind of special inexpensive plastic for CNC machining, but probably it not exists). Also based on users feedback i move body to 0.6mm backward to make it more easy to fit to Wooden Camera cage.
                          All my custom made accessories for BMMCC/BMMSC now available here https://lavky.com/radioproektor/

                          Comment


                          • As much as I like my one little remote, I don't like that the expansion ports are connected to it. So where ever I want the buttons the ports must also go.

                            In theory would it be possible to create an expansion box like yours paired with a remote that is smaller? Atm i have the one little remote bolted to the left side near the SD slot but it doesn't quite fit there, especially so if I plug anything into the back of it.

                            Comment


                            • Originally posted by Ryanite View Post
                              As much as I like my one little remote, I don't like that the expansion ports are connected to it. So where ever I want the buttons the ports must also go.

                              In theory would it be possible to create an expansion box like yours paired with a remote that is smaller? Atm i have the one little remote bolted to the left side near the SD slot but it doesn't quite fit there, especially so if I plug anything into the back of it.
                              If you have one little remote with round cable i think you can always open it, unsolder original cable and solder 3.5mm TRS socket there based on pinout drawing and info about my Expansion box. If you can not do it yourself just ask someone in your place who work in repair electronics industry. Dudes in music shops very often do a DIY things and happy to solder something.
                              All my custom made accessories for BMMCC/BMMSC now available here https://lavky.com/radioproektor/

                              Comment


                              • Originally posted by core_50 View Post
                                But you can't configure 4 pwm buttons without 2 TRS sockets
                                ha - true enough and i appreciate your further response as well on internal layout being a factor

                                I guess for me PWM just feels redundant since sbus is available and if you use an arduino and the library I put together its not any harder to do as the latter abstracts away the signal encoding anyway

                                Comment

                                Working...
                                X