Announcement

Collapse
No announcement yet.

Battery Handle for Pocket 4K and Micro - more info

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Battery Handle for Pocket 4K and Micro - more info

    This post is to answer a couple of questions I've been getting regarding my battery handle crowd funding campaign
    • Both the 9000mAh and 13000mAh attach directly to the Micro camera LPE6 slot with an included plate. No cables or dummy battery is needed. You can also power a monitor at the same time.
    • The 13000mAh handle DOES NOT need a dummy battery to power the Pocket 4K, because one of its output sockets is 12V and a Pocket 4K compatible cable is included.
    • The 9000mAh handle DOES need a dummy battery to power the Pocket 4K because its outputs are 7V.
    • Both NPF and LPE6 plates are included with both the 9000 and 13000 handles.

  • #2
    I got in on this for the larger one.

    Should be great for powering all sorts of things I have been using the tedious NP and LP-6 batteries for.
    Cameras: Blackmagic Cinema Camera, Blackmagic Pocket Camera (x2), Panasonic GH2 (x2), Sony RX100 ii, Canon 6D, Canon T2i,
    Mics: Sennheiser, AKG, Shure, Sanken, Audio-Technica, Audix
    Lights: Every Chinese clone you can imagine

    Comment


    • #3
      Unfortunately, Phil had to pull the plug on his battery grip, due to a technical issue.
      Here’s hoping he gets it solved.
      Cheers

      Comment


      • #4
        The mini-regulators didn't perform as hoped under prolonged use.

        Bummer.

        Oh well... we can't miniaturize everything for low prices...yet.

        I hope a better component at an affordable price exists. Can try this again if found.
        Cameras: Blackmagic Cinema Camera, Blackmagic Pocket Camera (x2), Panasonic GH2 (x2), Sony RX100 ii, Canon 6D, Canon T2i,
        Mics: Sennheiser, AKG, Shure, Sanken, Audio-Technica, Audix
        Lights: Every Chinese clone you can imagine

        Comment

        Working...
        X